05e5e615e AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad
0c4b9025c AP: Do not look for supported rates in DMG/IEEE 802.11ad
e72faadb4 bgscan_simple: Fix short_scan_count comparison
517b5f928 nl80211: Zero num_modes if nl80211_get_hw_feature_data() fails
39c5da328 nl80211: Use correct attribute for scan flags in vendor scan
c167662d7 eap_proxy: On SIM error flush PMKSAs only for SIM/AKA/AKA' networks
6657bb158 Fix OOM handling in neighbor report response handling
7187e2093 Allow LCI request with no subelements
d73420143 RRM: Enable beacon report with active/passive scan for all drivers
ec45927b8 Report received beacon report with BEACON-RESP-RX event
f3383366a Report beacon request TX status as control interface event
90d9d7c32 Beacon request through hostapd control interface
73a27a634 Add hostapd configuration parameter rrm_beacon_report
de6ec8b55 Enable Beacon Report using beacon table for all drivers
6774c6a9f Update copyright notices for the new year 2017
f56877414 Do not add own BSS in neighbor report with invalid op_class/channel
aeff0645d FILS: Fix FILS Realm Information ANQP-element construction
76196ddb2 wpa_supplicant: Add support for Beacon Report Radio Measurement
b3060bf99 common: Add helper function to convert RSSI to RCPI
1ac4dba31 wpa_supplicant: Extend verify_channel() and make it global
c9ff8e5f6 common: Add function to get an operating class by its number and country
e4f1d879c common: Add non-global to global operating classes conversion
96a5f14ee nl80211: Add support for additional scan parameters for beacon report
c16b9f8d3 driver: Add scan support to beacon report
3c716fdbd wpa_supplicant: Refactor wpas_rrm_build_lci_report()
e1b96e112 wpa_supplicant: Send rejection for unsupported radio measurements
0c73e410d wpa_supplicant: Limit RRM response size to MMPDU size
9664ab8b7 wpa_supplicant: Refactor Radio Measurement Request handling
332bf5d3f wpa_supplicant: Validate RRM request frame format
ec493469f wpa_supplicant: Move RRM implementation to a dedicated file
d1c74f8c9 Add RRM definitions for beacon report measurement
6a31440b8 Fix LCI request subelement processing
ce691a8d9 Add CONFIG_MESH into wpa_supplicant defconfig
67129ab9e wpa_cli: Add commands to use PMKSA_GET/ADD
bbad185c1 P2P: Fix compilation warning in p2p_add_device()
2977f5193 GAS: Remove unnecessarily duplicate gas_frag_limit configuration
1940559ea FT: Drop FT Action frames if ft_over_ds=0
d8de90487 Remove deprecated tx_queue_* params from hostapd.conf notes
78022c836 Fix memory leak on hostapd eap_user_file parsing error paths
02f999c6d hostapd: Remove unnecessary NULL check from parser functions
fd5f29e7e Fix memory leak in hostapd BSS_TM_REQ error path handling
95de34a10 Remove trailing whitespace
45997cce4 hostapd: Add TERMINATE as per-interface command
546680f81 hostapd: Do not update dtim_period with invalid value
356773058 RADIUS server: Increase maximum number of sessions
a5861afcb hostapd: Do not update invalid wep_key_len_unicast
f78402ace hostapd: Do not update rejected wep_key_len_broadcast
e0ba7efe5 hostapd: Do not update eapol_version with rejected value
9266d00bf hostapd: Reject invalid macaddr_acl value
8628555f9 hostapd: Check driver parameter before replacing previous value
1dfd25a68 Fix hostapd SIGHUP processing before interface is enabled
34e29dfd4 Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call
65dfa8728 mka: Make MKA actor priority configurable
9bcfd5be8 Document new D-Bus WPS properties
77fcbf7ff D-Bus: Use a helper function to get possibly NULL strings
dbf524946 D-Bus: Add DeviceType in WPS property
266097fda D-Bus: Add device serial number in WPS property
3ee6a3ab3 D-Bus: Add model number in WPS property
ae66822cd D-Bus: Add WPS model name as property
318d4b5be D-Bus: Add WPS manufacturer as property
b20f031c6 D-Bus: Add WPS device name as property
4a45dc192 mesh: Show [MESH] flag in print_bss_info()
c04a67deb hostapd_cli: Add completion for get command
bf4167b9d hostapd_cli: Add completion for set command
86adff09e hostapd_cli: Completion for further commands with STA parameter
4f59ad069 hostapd_cli: Use common completion for commands that use stations
62b95eb67 hostapd_cli: Add missing command help descriptions
04f02faac Fix wpa_cipher_to_alg() return type
9187b13ad wpa_supplicant: Add BSS CURRENT control interface command
d7f12e4eb OpenSSL: Make sure local certificate auto chaining is enabled
4be02b71b OpenSSL: Remove SSL_{CTX_,}_clear_options ifdefs
7655bd738 P2P: Do not use wait_time for SD Response TX without fragmentation
1f0fdaf0e Fix race condition between AssocResp callback and 4addr event
a6f3761f7 eap_proxy: Add support for SIM state change indication from eap_proxy
79a54ab9f eap_proxy: Fix eap_proxy_init() prototype to use const eapol_cb
4e118c847 D-Bus: Add 'freq' option to P2P Find method to specify starting channel
e414f4f02 PeerKey: Fix STK 4-way handshake regression
28fb9bb19 PeerKey: Fix EAPOL-Key processing
dfc773172 Android: Add p2p_add_cli_chan=1 option
7508c2ad9 PAE: Make KaY specific details available via control interface
b54f43390 FILS: Make FILS Indication element information available in BSS output
8183aee6c FILS: Add support for building FILS Realm Information ANQP-element
9cad61867 FILS: Add Realm Information ANQP-element in BSS data
26bf70e3d FILS: Separate FILS realm configuration from ERP domain
42b847ac1 FILS: Fix hashed realm name derivation
29062f293 Update various definitions based on IEEE Std 802.11-2016
aaa9c60bc Fix preauth_test build by updating add_pmkid/remove_pmkid callbacks
0babae87a Fix wpa_supplicant build error with IEEE8021X_EAPOL unset
19810d29b Make Beacon IEs available in wpa_supplicant BSS command
274e76f22 mesh: Fix channel configuration in pri/sec switch case
cebda0e3e Make debug print clearer for AP/mesh mode secondary channel issues
3459381dd External persistent storage for PMKSA cache entries
c57931273 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant
655dc4a43 Send "TERMINATING" event from hostapd
5149a0f04 P2P: Set p2p_persistent_group=1 at the time of reading disabled=2
065c029a5 Remove MBO dependency from Supported Operating Classes element
62cd9d792 nl80211: Specify the BSSID in the QCA vendor scan
444930e5b Define an attribute to do a specific BSSID QCA vendor scan
cea761472 Add QCA vendor command definitions for IDs 61-73
cb0cc6efa Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands
c313c8a5d Fix QCA vendor command values for SAR power limits
a5c723adc Interworking: Clear SCANNING state if no network selected
a1836de64 SME: Fix IBSS setup after shared key/FT/FILS association
f49c852b5 P2P: Fix a theoretical out of bounds read in wpas_p2p_select_go_freq()
944d48588 P2P: Fix a theoretical out of bounds read in wpas_p2p_setup_freqs()
0a6c9dc70 P2P: Send P2P-DEVICE-FOUND event on peer changing device name
9a431d493 WFD: Clear wfd_subelems when P2P peer stops sending them
6e374bd44 Ignore scan results from ongoing scan when FLUSH command is issued
71ac93453 Make update_idx available in BSS control interface command
49aa88bb5 P2P: Clear PEER_WAITING_RESPONSE on GO Negotiation success
c79238b6a Define a QCA vendor command to configure SAR Power limits
0f5eb69f8 Use eloop timeout for post-EAP-Failure wait before disconnection
20b1a9e23 Allow hostapd wep_key# parameters to be cleared
5ec3d510e wpa_passphrase: Reject invalid passphrase

Test: Wifi Suite

Change-Id: Ida52ca4e43bbc326a89d4c9848529df2d545b692
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>